I like protectli boxes. x86, low power, coreboot options, lots of network interfaces. The apus everyone recommends (myself included) are no longer available :(
+1, have had 10/10 experience with my Qotom - in fact I had to look up the brand to be sure that was what I had. Forgettability (due to reliability) is exactly what you want in router hardware.
Two devices I use - both running Debian, and both being open-source hardware to some degree or other:
PC Engines APU2, AMD x86_64, 4-core, 4GiB, 3x Gigabit Ethernet, 3 x mini PCIe, SIM slot, USB 3, Serial, SATA ports. Mine has dual band WiFi in one mPCIe, SSD in another.
Turris Mox, Marvel aarch64. This can expand via plug and go via a range of extension modules. I've got one with 25 Gigabit (3 x 8-port modules) Ethernet, 1 x SFP, 5 x USB3, Wifi, Serial.
> Far from it, there are separate registration and recycling schemes for each of the 28+ EU member jurisdictions (and even a few of their provinces). What part of COMMON MARKET was so hard to understand for EU lawmakers ?
Since there is no single registration available, and separate registration would involve mindboggling complexity, bureaucracy and costs, we do not sell to EU end users until the EU gets their act together. Please order from EU based distributors, or as a business customer.
> Business customers are expected to meet their obligations by registering in the EU countries they sell in.
> Wildly ironic that an EU company doesn't ship to the EU.
Switzerland is not part of the EU in this timeline... But their rant sounds very much like an excuse, the WEEE is in effect at least since 2021:
"All EU Member States are required to adopt the Waste Electrical and Electronic Equipment (WEEE) Directive 2012/19/EU, which sets rules for the collection, treatment, and recycling of electronic waste. However, some countries were granted an extension until August 2021 to meet the collection targets due to infrastructure limitations, including Bulgaria, Czechia, Latvia, Lithuania, Hungary, Malta, Poland, Romania, Slovenia, and Slovakia" - courtesy Google AI overview
And in the end, 90% of people will throw it in the trash with everything else. I'm actually in the other 10%, but I live in the middle of a big city where I have electronic waste container like 300m away.
Btw, that's an awful website. I like simple minimalistic websites, but some people confuse "simple" with "give literally 0 fucks about the reader" and then I have 50-word long lines to read on my 32" monitor. Just put something like {max-width: 1200px; margin: 0 auto;} on the body at least.
Yeah, that was my point, it's easy for me, but that's not the case for most people in the country. And I guess that most people living near me don't think about putting electronics in the dedicated container anyway, even if that container is near them.
I'm running OPNSense on a GMKtec G9 (a N150-based NUC with dual 2.5Gbps NICs), and a cheap managed switch. All-in, you can get it today for well under $300. Even that is rather overpowered for running my house.
The toughest component to pin down was a mesh wifi system that supports tagging VLAN segments. That's almost exclusively enterprise territory, so it's hard to find something affordable.
Is there a mesh wifi system that can run open source firmware? I imagine that might be the best bet for VLAN tagging too in the "affordable" sense too.
Not that I'm aware of, and I suspect that the whole idea of mesh radio is necessarily so closely tied to the specific hardware that for this to be practical, there's have to be some canonical physical implementation available for developers to program to.
For what it's worth, what I settled on is EnGenius's FitXpress products. But I'm not necessarily recommending that, I'm a bit ambivalent to it. Within its normal operational envelope it works well, but its range is far lesser than the TP-Link device I replaced, and rebooting one of the WAPs in the mesh takes seemingly forever (like, 10 minutes!).
Also not the OP, but I use a NanoPi M5 for my home router. I've got OpenWRT (technically FriendlyWRT, but it's the same) running on it with Docker for running NgINX and PiHole.
Do you remember the name of the product?