it's taken programming from being fully waiting on compilations to being incrementally compiled and productive back to waiting on the compiler all over again.
Linux has gotten pretty good lately. I wish it was better at running the game i want but other than that it's even better than macos in a lot of regards.
I am by no means an expert at sharpening knives but I can get my knives to razor sharp edges on a 20 dollar whetstone and an old pair of jeans glued onto a piece of plywood with some polishing compound on it as a strop. really isn't rocket science to do it right and it would take decades of daily sharpening(no one does this outside of chefs maybe) to make any kind of noticeable dent in the metal. if you can push it through paper(not just slice it) it's more than sharp enough and even a slicing cut on paper is fine.
there was a rich woman that drove into a lake on her estate and drowned because she couldn't open the door in time. you'd think a high profile death of a rich person would change something at least.
>there was a rich woman that drove into a lake on her estate and drowned because she couldn't open the door in time.
Just to expand a bit on vkou's sibling reply, exiting a car that has already gone under water is absolutely non-trivial in any vehicle. Water pressure goes up very fast with depth: at just 10' (3m) deep, just minimum recommended depth for a simple outdoor low dive board pool, you're already at 4.25 psi. At 16.5' (5m) you're up to 7.1 psi.
Just using a tape measure on a more compact car (not my truck) our in the parking lot, a GTI mini, front door is ~1680 in^2 in surface area. So you already cannot open the door if it's air inside and water outside and you're in even 10' of water let alone more. My recollection from driver's ed and then emergency response is that you're supposed to get the window open (by lowering it in time if electric or unshorted or more likely by shattering it with the emergency tool you hopefully have in the car) and let water fill the interior to equalize the pressure, trying to get a last breath from the bubble at the top as long as possible. Then you've got a breath-full-of-air time to get the door open (or get out through the broken window) and get to the surface. And not lose your bearings if it's anything but shallow+bright sunlight, etc., easy to do under water when panicked if you're not well trained to instinctively do tricks like let out a small stream of bubbles to feel which way is up. It's a pretty frightening (and thankfully rare) scenario.
I think I vaguely remember the incident you're talking about, and bad doors certainly didn't help, but it's not the same impact as someone being trapped right on land where 99.9% of vehicles made in history would allow an easy exit.
I don't think it's super complex with a ton of options any more. Just installed cachyos(arch based) kde plasma and the right click menu looks like this https://i.imgur.com/S59wy2H.png so either they are configuring away a lot of the complexity or the updates to it have been slimming.
- Change encoding? I have never changed the encoding of my terminal, not once since first using a computer, circa 1982. UTF8-FTW.
- Adjust scrollback, on the context menu?
- If you hide the toolbar/menu I believe it adds the main menu to the context menu. And that is where the majority of the hundred options live. And at the end, where a Properties or Preferences entry should live.
- Last but not least, no "New Tab" entry, which is the thing I use it for 90% of the time.
double click the tab area and you get a new tab. ctrl-n gets you a new tab. i personally wouldn't ever use that feature.
I like the extra modes of copying since they all have unique uses and prevent editing in cases.
the encoding bit is odd yeah. adjust scrollback is not a common option i suppose.
it would be nice to configure the right click menu more but that's not an option i see in many apps so it's a wash. I use the menu so i don't have those options. it may even be configurable via a file somewhere in .config... i haven't tried or been bothered by the defaults enough to do so.
> These films exhibit a transparency of 83.70–84.30% mm−1 and a tensile strength of 15.42–18.20 MPa. They biodegrade within 17 days in soil at 24% moisture content. These films demonstrate outstanding potential for food packaging applications. Our research approach of repurposing agricultural byproducts to create high-value products helps reduce plastic waste, conserve the environment, and provide economic benefits to farmers.
the places around here are using compostable plastic bags. not sure what it's made of but it can be composted in municipal facilities according to the bag. one downside is they are green tinted and harder to see what is in there but if it removes some of the plastic killing the ocean then i'm for it... assuming it's not a plastic that degrades into microplastics.
> it can be composted in municipal facilities according to the bag
Note that "according to the bag" is very different from "according to your municipality"; my understanding is that most places actually can't handle them, and they might need to divert your compost to the landfill if it has too much of those plastic bags. They can be composed under certain conditions, but whether the facility your municipality uses has those is unclear.
See also "flushable" wipes that must not be flushed down the toilet.
I'd assume those bags would be okay considering they break down after a few days of holding compostable materials, and frequently make a mess in the compost bin. The "compostable" cutlery is definitely not compostable under normal household situations though.
My understanding is most manicipal compost facilities can handle them - the vast majority of manicipalities don't have a facility at all. They are expensive. A home pile won't compost them, a pile at manicipal size is likely a health hazzard and so not a good option.
Most of these at least in my region are made from cornstarch. They decompose well/without "microplastics" but only under correct conditions.
Home composts aren't usually meeting these, their temperature isn't going high enough for full decomposition and you can have traces of polymers left behind. I throw them in the trash for compostable waste because thankfully my collectivity collects these to generate biogas and my guess is they do end up in much larger/managed composts where they can fully decompose.
PLA doesn't actually biodegrade outside of specialist industrial facilities, it was much vaunted as an eco friendly thing when 3d printing started using it, but we rapidly found out it can last decades without breaking down much if at all.
> but if it removes some of the plastic killing the ocean then i'm for it
It doesn't. The plastics in the ocean don't come from your grocery store. They come from fishing gear and from places without municipal trash service.
Honestly? It's basically greenwashing, it doesn't actually do anything at all. No one ever composts this things, and landfilling or incinerating a bag does not harm the environment.
yeah I mentioned municipal compost because they can get the compost temperature way higher than we can at home scale. It should break down in the big compost piles they have
bundler is generally pretty fast on the ruby side. it also reuses dependencies for a given ruby version so you don't have the stupid node_folder in every project you use with every dependency re-downloaded and stored. if you have 90% of the dependencies for a project you only have to download and install/compile 10% of them. night and day difference.
